★ The AE-202 Project ★

so you guys know my car....



Updated Info List (20.03.2014)

Engine & Performance:

3S-GE with S54 Gearbox - 175bhp from factory, Dyno proven at 195bhp currently
Weighed the car with full interior - 1080 Kg
SARD Analyse ECU
Custom 2.5" Mandrel Bent Exhaust system
HKS 4-2-1 Exhaust manifold
Pipercross Airfilter
ARC Magic Chamber
Ultra Power 7mm Ignition Leads
Dual Core Aluminium Radiator
Oil Catch Can
Battery Relocation to the boot

Exterior & Body:

FX-GT Front Bumper with Fogs
Integra DC2 front lip
Corolla BZ touring headlights
Corolla BZ Touring grille
OEM wind deflectors
Subaru Impreza STi side skirts with spats
Customised rear bumper with Subaru Impreza STi hockey sticks and spats moulded in
Facelift JDM rear garnish
Facelift crystal rear lights
Lip spoiler moulded on the bootlid

Chassis & Wheels:

BC Coilovers
15" Wolfrace Pro Lite alloys
Front strut bar
TRD front ARB
Front brake upgrade to 275mm using AE111 Levin Twinpots
OEM AE101 Levin Rear Disc Brakes conversion

Interior & Cockpit:

Evo 1 Recaro seats
Italv Lanti Red Stitch Steering
ARC Shift Knob
Oil Pressure Gauge custom dash mounted
Apexi RSM custom dash mounted
Razo foot pedals

Optional Extras:

Toyota OEM Ae101 Multibox
Toyota OEM Ae101 Cup Holder
Toyota OEM Ae101 Flare
Toyota OEM Ae101 Electric Mirrors with Retracting switch
Toyota OEM Ae101 Large Suede Arm Rest
Toyota OEM Ae101 Levin Floormats
Toyota OEM Roof mounted Air Purifier
Toyota OEM C pillar Map Lights
Toyota OEM Clean box
Toyota OEM Con light (auto headlights)
Toyota OEM Ae101 Corolla Si Speedometer

the following is a list of things iv got, will be adding things to it when i get the parts....

Engine and box:

95 Celica ST-202 3S-GE engine
S54 Box

ECU & Wiring:

Standard 93 corolla 4E-FE Engine loom
95 Celica ST-202 engine loom

Engine Mounts to fit Ae101 / E10:

timing belt side engine mount use a Rav4 3sfe mount.

Modified corolla/celica gearbox mount

Modified corolla/celica Front mount

Modified corolla/celica Rear Mount.

Driveshafts:

gen 5 Celica (St182) Driverside (longer) Driveshaft
Custom Passenger (shorter) Driveshaft

Fuel Pump:

Standard

Brakes:

Avensis Twin Pot calipers (unsure if they fit)

Cooling:

Celica ST-202 Rad

ishaq

pic of standard corolla 1.3 4efe timing belt side mount




pic of standard corolla 1.3 4efe gearbox side mount

whilst i was at the scrapyard picking up my rav4 mount, they were taking a corolla apart, so i saw an opportue moment to see if the rav4 mount would fit corolla chassis...







it fits

i want HKS purple (but thats anodised), but searching around i found that "Dormant purple" is one of the closest colours but thats powder coated.

does anyone know what colour is close to this and what the paint code is?



heres a pic of Dormant purple






or

Holden Ve Morpheus Purple
Colour code: 448N





or

"Concord Purple", code HAR47 found on Harleys.

Ishaq, are you going Saints Row on us? Looks awesome tho!

pics of some of the parts i have collected so far...

standard 4efe loom







fuse box



Rear disc conversion and St182 driveshafts (in the white bags)



Rav4 mount




oil sandwich plate

Looking good! Isnthe oil sandwichplate to connect gauges to the standard oil pump?

it goes on to oil filter housing, so the sensors can go on there

Good stuff mate. Good to see another 3sge build thread. Nice job getting the opportunity to see if the rav4 mount fits. Didn't i tell you?? haha, its a good idea tho to get the top part of the corolla mount (the third bolting hole) cut it from the corolla mount and weld it to the rav 4 mount for extra bolting steadyness!! The engine loom is gonna be loadsa fun haha. that purpl is well nice too!!

lol nice one mate...
im not touching wiring lol

are those rear hubs four stud?

yup...
they off a corolla g6

sweet, reason i ask is that i want to hold onto my wheels! would it not be easier to drop the back end of the g6 with hubs and brakes attached and replace the back end of your corolla with the g6 back end?

basically im just taking hubs and handbrake cables off and replacing with these, straight swap

cool, if you get around to doing that before i go at my brakes, post some photos and write up, interested to know how its done

yup will do mate...
i have another set of rear disc conversion in the back yard but its been sat in garden awhile...
would send but its way tooo heavy

No bother, i think theres a few of them in the scrap yard here, if not a friend of mine can get his hands on some. Thanks mate.

no worries mate

This page might be of some use to you mate http://www.mr2.com/forums/beams-owners-group/Toyota-MR2-48395-redtop-wiring-diagrams.html

thanks mate

went to the scrapyard today and bought 2 things

Avensis 2.0 3s-fe Gearbox Mount



Avensis Twin-Pot Calipers and carriers (hope these fit)

I'm curious too whether the avensis ones will fit... somehow (I think it's because sometimes I like brands a bit too much) I still think I should get myself some Brembo calipers... The Peugeot 406 had twin pots Brembo calipers, not sure whether they fit tho

lol rachid, big names big prices...

i know the standard avensis ones fit as thats what i have at the min, and im hoping these calipers fit the same as the others, but these are twin-pots so better braking power

So there are two types, the single and the twin pot avensis... what about the GT4 then? These should fit (with an adapter I thought, I thought even TRD had those once) and have good braking power too