Quick Question..

New Member Posts : 4 Reputation : 0 Join date : 2014-03-20

So lads just a quick one,wondering if these alloys with a center bore of 73.1mm will fit on my ae101 levin? - http://www.eastcoastalloys.com/alloy-wheels/xxr-002-15-sil.html

says here - http://www.wheelfitment.net/toyota - that the wheel bore from factory is 54.1mm?

Would i need some spacers? tried a deep dish alloy on the front left of my car and the brake calipers where touching the back of the spokes?

Thanks to all.

Subject: Re: Quick Question.. Thu Aug 07, 2014 6:01 pm

If the calipers are touching spoke, spacers would help.

You would need to get a hubcentric ring that goes from 73.1 (outer diameter) to 54.1 (inner diameter). I got mine from this site: http://www.hubcentric-rings.com/

Subject: Re: Quick Question.. Thu Aug 07, 2014 6:24 pm

Whilst hub-centric adaptor rings would be a good idea, the wheels will still on the hub without them (just the studs will be copping all the shear loads)

New Member Posts : 4 Reputation : 0 Join date : 2014-03-20

Thank you very much lads Smile

» quick question
» NRG hub and 2.5 quick release for sale
» Need some answers pretty quick....
» Quick release snap off boss kit **GB END DATE Fri 15th FEB**
» DIY Question..