No power to Accessories when the key is ACC Position

I don't know how to better describe it than the title of this thread but that's pretty much it. All power comes on ON position but no radio on ACC position.

It might also be worth noting that my alarm does have power unless place the key on ON position.

Thanks again!

Regards,

Coj

SO, the radio works in the final key position, but not the first? Sounds like the power wire is connected wrong. Is it an aftermarket radio or wire harness, or has it been tampered with in any way in the past?

It is an aftermarket radio. I'm not too sure about the harness though.

How come my alarm doesn't have power either.

I just took our the ignition switch and did a connection test and all seems fine on that front.

Yeah you need to remove the radio and move the power wire from the ON to the ACC feed.

The alarm will be wired in the radio's power wires as thats the easiest place to do it but it sounds like the 12v constant isn't connected, Like Chris said the radio will be wired in wrong.

I rewired the alarm and it was not connected to the 12v source. but my power locks only have power when I'm on the ON position

They should be a constant 12v as well

» JDM rare accessories for sale
» Module Position & Electric AC Controls Question
» Power Folding Mirrors
» Power steering rack
» restoring power on my old trueno